HY-B Series Machines

HY-B Series Machines

Feeding Unit
 
1. Lead edge feeder system

Adopting advanced lead edge feeding system, with stable high speed, easy operation and high accuracy.
High pressure centrifugal fans(7.5kw). The absorption force can be adjusted to different cardboard thickness and dimension. Frequency converter control the force, make sure the smoothly feeding
The left , right bar can be adjust by tool. Digital display, prompt , accurate and convenient.
Has interval paper feeding device.  (continuous or interval feeding is optional). Convenient for larger sized cardboard printing .
Digital display the Number and Working speed of the machine
Interlocking switch with slotting unit, realize the Scram , stop feeding or Re-feeding, Forward and reverse Jog . More humanity
Back -paper holder frame with manually adjust. Raising paper by pneumatic control.
Equipped with brush device(4kw) to sufficiently eliminate dust and scraps as well as foreign substances on the printing surface and to improve printing quality

2. Feeding roller

Upper feeding roller :O.D. :140mm. applies Seamless steel pipe with wearable rubber and subject to balance alignment, ensure stable feeding, accuracy and reliable. 
The lower feeding roller is embossing and chrome plated and subject to balance alignment.
Interval of the feeding roller is adjusted by high precise worm box with a range of 0-11mm.

3. Machine leave-joint

Separation by electricity and pneumatic locking up, working with alarm bell to ensure the security of operators.
Applies the protection equipment of starting motor. Applies the pneumatic locking device ensuring Hard lock .
Equipped with force limitator on driving axle to protect machine.
Ground Locking device ensures stable and fast running.
Self-locking device . When working , the machine be locked up otherwiseIt can not start at the beginning . Enhance the security in working time.
 

 
Printing Unit
 
1. Printing roller
 
¢450mm(O.D. :450mm)
With super quality steel plate object to balance alignment and chrome plated . stable operation and high speed.
Zero line was equipped on surface of roller, convenient for hanging plate.
Ratchet coil axis with locking up device ensure more faster and precise plate installation.
Foot switch control the turning direction of roller.
Axial adjustment of the printing roller is manually with scope 10mmx2.

2. Printing press roll.

O.D. : 140mm,Steel pipe with grinding and chrome plated . Subject to balance alignment , stable operation。
Printing press roll gear can be adjusted without backlash mechanism. 
The adjustment does not affect the gear meshing to ensure transmission accuracy
Interval of the Printing press roll is adjusted by high precise worm box with a range of 0-11mm.

3. Anilox roller

Applies seamless steel pipe with grinding and chrome plated and balance alignment.
O.D. : 175mm,  Reticulation is 180-250 lines/inch (optional)
Pneumatic auto up and down device and racing device. 

4. The rubber roller

Seamless steel pipe with wearable rubber wrapped. O.D. : 156mm,Rubber roller is highly rigid and have good ink transfer effect.
DIF device with the anilox roller so that it can wipe ink. automatic racing device prevent dry of ink.
Interval of the the rubber roller is adjusted by high precise worm box with a range of 0-11mm.

5. Paper feeding roller

The upper roller : O.D. 85mm seamless steel pipe with 4 feeding rings .
The lower roller: O.D.140mm seamless steel pipe with highly grinding and chromed plated.
Paper feeding roller gear can be adjusted without backlash mechanism. 
The adjustment does not affect the gear meshing to ensure transmission accuracy
Interval of the Paper feeding roller is adjusted by high precise worm box with a range of 0-11mm.

6. Ink circulating system

Pneumatic diaphragm pump ensuring stable inking, easy operation and maintenance.
Have inking filter, filtrate the impurity

7. phase adjust unit

With speed compensating device
Printing phase adopt electrical digital adjusting with 360° degree. (stop and running) . 
Printing phase fixing device and pneumatic brake device. If separation happened , the brake device will stop the motor and keep the gear at the original situation.

8. Auto-zero device
auto-zero device ensuring uniform adjusted of the machine and decrease waste.
 
  
 
Slotting Unit
 
1. The scoring roller

Shaft diameter: 85mm . Seamless steel pipe with twice grinding and chrome plate , stable moving.
Equipped with 2 set of knife seat fixed many kinds of cardboard. Trim blade and the lower edge knife is alloy steel with heat treatment and grinding, sharp blade and long lifespan.
Interval of scoring roller adjusted by hand , adjusting range is 0-11mm.

2. Slotting seat axially moving adjusted mechanism

Upper Shaft diameter : 155 mm , lower Shaft diameter : 155 mm . seamless steel pipe with twice grinding and chrome plated . Highly rigid shaft ,hard-wearing, stably moving.
7mm alloy steel coring knives with indent heat treatment to enable grinding teeth sharp edge and high precision. 
Four knives adjustment, with length, width adjustment upper and lower knife stand, pressing line, cutting knife ruler, pressing paper pole which have united movement by hand, saving order changing time.
Interval of up and down knife seat is adjusted by high precise worm box .
Corner cutting seat applies soft connect, prolong using life and prevent unclear cutting.

3. Slotting phase adjusting device

With speed compensating device
Slotting phase adopt electrical digital adjusting with 360° degree. (stop and running) .
The length and wide of the carton is synchronic control and hand adjusted with 4 knives united movement.
 
  
 
Die Cutting Unit
 
  • rubber cushion from Taiwan with convenient installation and long lifespan
  • rubber cushion roller cutting and repair mechanism. The rubber dressing can be used repeatedly which can save the using cost greatly
  • A speed difference off setting device is adopted that can automatically adjust the rotation speed of the rubber roller so that the die cutting carton has exactly the same shape as the die shape
  • Axially conjunct moving of the cam type soft roller is 40mm, uniform wear and tear , raise the occupation of the gum cover, save the cost.
  • The adjust of pressure is adjusted by high precise worm box, convenient and swift
  • With speed compensating device
  • Die cutting phase applies electric digital adjustment with 3600( both running and stop)
  • paper feeder roller
(1)The upper roller : O.D. 85mm seamless steel pipe with 4 feeding rings . 
dynamic balancing adjusted with stable operation. The surface is ground and electro-plated with hard chrome
(2)The lower roller: O.D.140mm Utilizing precision machined high-quality seamless steel pipe, dynamic balancing adjusted with stable operation.
 The surface is ground and electro-plated with hard chrome
(3)Feed roller gear can be adjusted without backlash mechanism. 
The adjustment does not affect the gear meshing to ensure transmission accuracy
(4)Interval of the feeding roller is adjusted by high precise worm box with a range of 0-11mm. 
spanner adjustment, dial scale display. convenient and swift.
 
  
 
  
 
Stacker Unit
 
1.  Connection arm operation with automatically
2. The driving belt of connection arm can adjust the elasticity alone and choose the number of connection arm at will.
3. Pile up to 1600mm.
4. Platform elevator with brake control device to keep stable position anti-slipping.
5. A pneumatic controlled-plate will be pop-up to hold the coming substrate, when a presetting height reaches.
6. Anti-slipping belt used in the transport bed.
 
 
 

Main technological parameter

NO.

parameter

unit



1

Max. speed

Pcs /min

120

2

Economic speed

Pcs /min

0-100

3

Topping precision

mm

±0.3

4

Standard plate thickness

mm

7.2

5

Cardboard thickness

mm

2-11

6

Min. slotting interval

mm

165x165x165x165

7

Max. slotting depth

mm

acc. BSY Models.


Slotter Parameters
Model Min. Maks. Skipfeed
BSY-295 280x600   920xMachine Width 1100xMachine Width
BSY-340 280x600 1050xMachine Width 1300xMachine Width
BSY-420 350x700 1300xMachine Width 1500xMachine Width
BSY-480 400x700 1450xMachine Width 1800xMachine Width
BSY-530 420x700 1650xMachine Width 1900xMachine Width
BSY-610 450x720 1900xMachine Width 2100xMachine Width
 


  
 
 
 

Contact:

Adress: Suadiye Cad. No: 20 41320 Sarımeşe / Kartepe / Kocaeli / TURKEY

info@cardboardboxmachines.com

Tel: +90 262 371 60 60   Fax: +90 262 371 50 35

© 2020 Kav Group All Rights Reserved.

Follow Us:

Bizi Facebook'da Takip Edin Bizi Twitter'da Takip Edin Bizi Linkedin'de Takip Edin Bizi Youtube'da Takip Edin

Links:

KAV Paper Products Co. KAV Cardboard Box Co.
 
HUAYU

kocaeli web tasarım